How to Read a 3 Pointer Altimeter

How to Read a 3 Pointer Altimeter


A three-pointer altimeter, as its name implies, has three different pointers on the front

dial. They are the 100-foot pointer, the 1000-foot pointer, and the 10,000-foot pointer. The medium length pointer is the 100-foot pointer, the shortest pointer is the 1000-foot pointer, and the longest pointer is the 10,000-foot pointer. The altimeter dial has 10 major indices numbered 0 through 9. In between each major indice are 4 minor indices. The value of these indices is dependent on the pointer being read. When reading the 100-foot pointer each minor indice equals 20 feet, each major indice equals 100 feet. When reading the 1000-foot pointer each minor indice is equal to 200 feet, each major indice is equal to 1000 feet. When reading the 10,000-foot pointer each minor indice is equal to 2000 feet, each major indice is equal to 10,000 feet. The altimeter in figure 1 is indicating 11,520 feet and is read as follows:


The 10,000 foot pointer is past the 1 and not yet up to the

2 and so it is read as:                                                           1 x 10,000 = 10,000 +

The 1,000 foot pointer is past the 1 and not yet up to the

2 and so it is read as:                                                           1 x 1,000 = 1,000 +

The 100-foot pointer is 1 minor indice past the 5 and so

Therefore, it is read as:                                                        5.2 x 100 = 520


The indicated altitude is the sum of the pointers:                        11,520



Figure 1: Three-Pointer Altimeter

Understanding Altimeters

Understanding Altimeters


In its purest form, an altimeter is simply an absolute pressure gauge. This means that it is displaying the pressure being exerted by the atmosphere at its current location.

The earth is surrounded by an atmosphere. This atmosphere is the air that we breathe. The atmosphere is held in place by the earth’s gravity. The atmosphere has a specific weight. The weight of the atmosphere is approximately 14 pounds of weight for every square inch of earth when measured at sea level on an average day.

An accurate method of measuring this weight is to use a barometer. A barometer is a reservoir filled with mercury. The reservoir has two openings; one opening is exposed to the atmosphere and the other empties into a glass tube. The atmosphere pushes down on the mercury within the reservoir causing the mercury to fill up the glass tube. How far the mercury goes up into the glass tube is directly proportional to the weight of the atmosphere pushing it. This is why barometric pressure is normally expressed in terms of “Inches of Mercury (InHg)”.

At sea level, on an average day, the barometric pressure is 29.92 InHg. However, this will vary constantly depending on the weather. Stormy weather tends to pull the atmosphere away from the earth’s surface causing lower pressure. Hot, dry weather pushes the atmosphere down causing higher pressure.

The weight of the atmosphere also changes depending on altitude. The closer to sea level that you are, the more air there will be, consequently the atmosphere will weigh more. As you go higher in altitude, the less dense the atmosphere will be, therefore less weight or pressure is exerted. An altimeter measures this change in atmospheric weight as expressed in terms of pressure or feet of altitude.